We understand your time is valuable, same day appointments are available for many of our services subject to availability, Call now to secure your spot:

Toilet Leaking

With the onset of chilly weather, it’s crucial to prepare our homes to face the winter challenges. As a plumber with years of experience in the area, I want to share some valuable tips to ensure your plumbing system runs smoothly during the colder months.

1. Protect Your Exterior Pipes:

Exterior pipes are particularly susceptible to low temperatures. Make sure to disconnect and store garden hoses. Additionally, consider wrapping exterior pipes with insulation to prevent freezing, which can result in costly repairs.

2. Check and Repair Leaks:

Leaks can be a nuisance during any season, but in winter, they can become an even greater challenge. Before temperatures drop further, inspect all water valves, faucets, and pipes for potential leaks. Fixing them now can prevent major issues when the weather becomes more extreme.

3. Ensure Proper Insulation:

Adequate insulation not only helps keep your home warm but also protects your pipes from freezing temperatures. Ensure that susceptible areas, such as the basement and attic, are properly insulated to ward off freezing problems.

4. Drain Your Outdoor Systems:

Before the first frost hits, drain any outdoor systems that may freeze, such as irrigation systems. This will help prevent damage to pipes and components, ensuring optimal performance when you need them again in the spring.

5. Maintain a Slight Faucet Drip:

On particularly cold nights, allow faucets to drip slightly. This can prevent the accumulation of ice in pipes, reducing the risk of freezing.

Preparing your home for winter will not only save you money on repairs but also ensure your comfort during the colder months. It’s always advisable to seek professional advice. If you have any questions or issues, feel free to contact us! We’re here to help you keep your home warm and cozy throughout the winter season.

Living in Lewisville, Texas, presents a unique set of challenges for homeowners, especially when it comes to maintaining a functional and reliable plumbing system. With fluctuating temperatures and occasional extreme weather conditions, ensuring that your pipes, fixtures, and appliances are in top shape is crucial. Proactive plumbing maintenance is the key to safeguarding your property and saving on potential costly repairs down the line.

Importance of Proactive Plumbing Maintenance:

  1. Protecting Against Winter Woes: Insulate Your Pipes and Prevent Freezing
  2. Ensuring Efficient Water Heater Performance: Tips for Annual Inspections and Maintenance
  3. Addressing Common Leak Issues: Detecting and Fixing Leaks Early On
  4. Maintaining Healthy Drains: The Role of Regular Drain Cleaning and Inspection
  5. Enhancing Longevity of Fixtures: Tips for Proper Care of Faucets, Showers, and Toilets

Effective Strategies for Plumbing Maintenance:

  1. Setting Up a Seasonal Inspection Schedule: The Benefits of Regular Professional Assessments
  2. DIY Tips for Homeowners: Simple Steps to Check for Leaks and Address Minor Issues
  3. Understanding Water Pressure: How to Monitor and Adjust Water Pressure Levels for Optimal Performance
  4. Implementing Water-Saving Practices: Reducing Water Waste and Lowering Utility Bills
  5. Educating Family Members: The Importance of Responsible Water Usage and Plumbing Awareness.

Investing time and resources into proactive plumbing maintenance not only ensures a smoothly functioning plumbing system but also helps you avoid unexpected and costly repairs. By staying ahead of potential issues and implementing effective strategies, you can protect your Lewisville home and maintain peace of mind. Prioritize regular inspections, timely repairs, and responsible water usage to enjoy a well-maintained plumbing system that stands the test of time.

Ready to safeguard your home with professional plumbing services in Lewisville, Texas? Contact All Metroplex Plumbing today for expert guidance and assistance. Click Contact page to get in touch with our team and schedule a consultation.

Is your water heater not performing as it used to? Are you experiencing lukewarm showers and struggling with inconsistent water temperatures? Don’t worry, you’re not alone! Many homeowners overlook a crucial aspect of home maintenance – the water heater. At All Metroplex Plumbing, we’re here to provide you with the ultimate guide to water heater maintenance, specifically focusing on tankless water heaters.

Why Water Heater Maintenance Matters

Did you know that the minerals present in your water can gradually lead to the buildup of hard water deposits in your tankless water heater? Over time, this buildup can affect the efficiency and performance of your heater, leading to higher energy bills and a shorter lifespan for the appliance. That’s where regular maintenance comes into play.

The Power of a Water Heater Flush

One of the most effective ways to maintain your tankless water heater is by performing a water heater flush, as recommended by manufacturers. This simple yet powerful process involves clearing out the mineral buildup that accumulates within the coils and the combustion chamber. By doing this, you can ensure that your heater operates at its best, providing you with consistent hot water and energy savings.

DIY Water Heater Flush: Steps and Tips

Performing a water heater flush might sound intimidating, but it’s actually a straightforward process. Here’s a quick rundown of what you’ll need and the steps involved:

Materials Needed:

White vinegar




Mix one gallon of white vinegar with two gallons of water to create a flushing solution.

Attach a pump to help circulate the solution through the water heater.

Open the valve to allow the solution to flow through the heater’s coils and combustion chamber.

Let the solution circulate for about 20 to 30 minutes, allowing it to dissolve mineral buildup.

Once done, close the valve, remove the pump, and drain the remaining solution.

The Result: Improved Efficiency and Longevity

By dedicating just a little time once a year to perform a water heater flush, you can enjoy several benefits. Not only will your tankless water heater operate more efficiently, but you’ll also extend its lifespan, saving you money in the long run. Plus, you’ll bid farewell to lukewarm showers and welcome the comfort of consistent hot water.

At All Metroplex Plumbing, we’re dedicated to helping you make the most out of your appliances. Regular water heater maintenance is a small investment that yields significant returns in terms of performance and longevity. If you’re unsure about performing a flush yourself, don’t hesitate to contact our experts for professional assistance. Keep your water heater in top shape – your future self will thank you!

Detecting Toilet Water Leaks: A Step-by-Step Guide

Step 1: Checking the Water Meter

To initiate your investigation, start by turning off all water-using appliances and fixtures in your home, such as faucets, showers, and washing machines. Begin by locating your water meter and recording the current reading. After allowing about an hour to pass without any water usage, check the meter again. If you observe an increase in the reading, it could indicate a potential leak within your plumbing system.

Step 2: Conducting Visual Inspection

Engage in a thorough visual inspection of the area around your toilet. Be vigilant for visible water indicators, like puddles, damp spots on the floor, or moisture on walls. Examine the toilet’s base, floor connection, and tank for any potential signs of leakage.

Step 3: Utilizing the Food Coloring Test

Unveil the mysteries of toilet leaks through a simple yet effective technique: the food coloring test. Unlock the secrets of your toilet tank by adding a few drops of food coloring to the water within. Wait patiently for 15 to 20 minutes, refraining from flushing. Should you spot colored water in the toilet bowl, this could signal a leak between the tank and the bowl.

Step 4: Listening for Clues

Remember, even the quietest symphonies can carry crucial information. Sometimes, a stealthy leaking toilet may emit a faint hissing sound, a consequence of constant water flow into the bowl. Amid the tranquility of your bathroom, tune in to the inner workings of the toilet tank. An unusual melody might indicate a concealed leak.

Step 5: The Role of Toilet Dye Tablets

Toilet dye tablets, available at most hardware stores, can offer valuable insights. Introduce a single tablet into the toilet tank and allow approximately 30 minutes for its effects to unfold. If the toilet bowl displays a splash of color, it’s likely a sign of a leak.

Step 6: Seeking Professional Insight

Should you adeptly navigate the preceding steps but still grapple with an elusive leak, it’s time to call in the experts. Plumbing professionals possess the requisite tools and knowledge to pinpoint and rectify leaks accurately, ensuring the efficiency of your plumbing system remains uncompromised.

Are you a homeowner in Lewisville or the surrounding areas seeking reliable toilet installation services? Look no further than All Metroplex Plumbing! As your trusted local plumbing experts, we understand the importance of a seamless and efficient installation process. In this comprehensive guide, we’ll walk you through the essential steps of toilet installation, empowering you with the knowledge to make informed decisions and ask the right questions when our team arrives at your doorstep.

Choose the Perfect Toilet for Your Home:

Selecting the right toilet is the first step to a successful installation. At All Metroplex Plumbing, we offer a wide range of high-quality toilets that combine water efficiency, stylish designs, and advanced flushing mechanisms. Our knowledgeable team will gladly assist you in choosing the perfect toilet that fits your needs and complements your bathroom decor.

Accurate Measurements and Precise Preparation:

Our experienced plumbers understand that proper preparation is key to a hassle-free installation. We’ll take precise measurements of your existing setup, ensuring a perfect fit for your new toilet. Our thorough inspection will uncover any potential issues, allowing us to address them promptly and efficiently.

Quality Tools and Materials:

At All Metroplex Plumbing, we believe in using only the best tools and materials for your toilet installation. Our top-notch wrenches, screwdrivers, levels, wax rings, bolts, and caulking guns ensure a durable and leak-free result. Trust that we’ll never compromise on the quality of our service or the products we use.

Professional Removal and Installation:

When it’s time to install your new toilet, our skilled technicians will handle the process with utmost care and expertise. We’ll remove your old toilet with precision, avoiding any damage to your flooring or plumbing system. Our team will then meticulously install the new toilet, making sure it’s perfectly level and aligned for optimal performance.

Thorough Testing for Your Peace of Mind:

Before we leave your premises, we conduct thorough testing to guarantee a flawless installation. Our meticulous checks for leaks and proper connections ensure that your new toilet operates at peak efficiency. We take pride in leaving your home with a fully functioning and reliable plumbing fixture.

All Metroplex Plumbing is your go-to plumbing service for expert toilet installation in Lewisville and the surrounding areas. With our commitment to quality, precision, and exceptional customer service, you can have peace of mind knowing that your toilet installation is in the hands of professionals. We empower homeowners like you with valuable information and guidance to make educated decisions about your plumbing needs. Trust All Metroplex Plumbing to deliver top-notch service and a perfectly installed toilet that will serve you and your family for years to come. Contact us today to schedule your toilet installation appointment!

Looking for reliable plumbing solutions? All Metroplex Plumbing Services has got you covered!

When it comes to maintaining a functional and efficient plumbing system, hose bibs play a vital role. These outdoor faucets provide a convenient water source for various tasks, such as gardening, car washing, or even filling up a kiddie pool on a hot summer day. However, like any plumbing fixture, hose bibs can experience issues over time, such as leaks, drips, or reduced water flow. In this blog post, we will explore the importance of hose bib repair and offer valuable insights to help you keep your outdoor faucets in top condition.

Identifying Common Hose Bib Problems:

Before delving into the repair process, it’s crucial to recognize the signs of a malfunctioning hose bib. Some common issues include leaks around the valve stem, dripping even when the faucet is turned off, or inadequate water pressure. Additionally, freezing temperatures during winter can cause cracks in the hose bib, leading to leaks when the weather warms up.

Tools and Materials:

To carry out a successful hose bib repair, it’s essential to gather the necessary tools and materials. These typically include an adjustable wrench, pipe thread sealant tape, plumber’s tape, a screwdriver, replacement washers, and a hose bib repair kit. It’s always advisable to have these items readily available to streamline the repair process.

Step-by-Step Hose Bib Repair Guide:

a. Shut off the water supply: Before commencing any repair work, ensure the water supply to the hose bib is turned off. Locate the water shut-off valve, typically found indoors near the hose bib connection point, and close it tightly.

b. Remove the hose bib handle: Use a screwdriver to remove the screw securing the handle in place. Once removed, gently pull the handle away from the faucet, revealing the valve stem.

c. Inspect the valve stem and washer: Examine the valve stem for any signs of wear, corrosion, or damage. Replace the washer if it appears worn or cracked. Use the adjustable wrench to remove the valve stem from the hose bib.

d. Apply thread sealant tape: Wrap the threaded end of the valve stem with pipe thread sealant tape. This helps create a watertight seal when reassembling the components.

e. Replace the valve stem and washer: Insert the new or repaired valve stem into the hose bib, ensuring a snug fit. Attach the replacement washer securely.

f. Reassemble the hose bib: Place the hose bib handle back into position and secure it with the screw. Ensure it is tightly fastened but avoid over-tightening, as it may cause damage.

Additional Tips and Considerations:

a. Insulate hose bibs during winter: To prevent freezing and potential damage, consider insulating your hose bibs using foam covers or wrapping them in insulating materials.

b. Regular maintenance: Periodically check your hose bibs for signs of leaks, corrosion, or wear. This proactive approach can help identify minor issues before they escalate into major problems.

c. Professional assistance: If you’re unsure about tackling hose bib repairs or encounter complex issues, it’s always advisable to seek the assistance of a licensed plumber. They possess the expertise and specialized tools necessary to handle any plumbing-related challenges.

Properly functioning hose bibs are essential for maintaining a well-maintained outdoor area and ensuring a reliable water source for various tasks. By following the step-by-step hose bib repair guide outlined in this blog post, you can address common issues and keep your outdoor faucets in optimal condition. Remember to exercise caution, and if in doubt, consult a professional plumber to guarantee a successful repair job. By investing time and effort into hose bib maintenance, you’ll enjoy a durable and efficient outdoor water supply for years to come.